21700 HohmRun
QSP Li-NMC | 39.1A-49.5A | 3023mAh | 3.6V
Can be charged at a tested/proven 5.29A rating: Yes, 5.29, as in FIVE POINT TWO NINE. It is possible, tested, proven, and approved
Purpose-built to exceed amperage capabilities of ALL previous non-QSP batteries
Utilizing our latest QSP Li-NMC processed chemistry; resulting in the purest chemistry to date
39.1A CDR runs from 4.2V down to 2.5V @ under 76oC MAX (Neware Analyzer | Palmer Probes | 22-25oC Ambient | No Moving Air)
Utilizing the proven compound in updated Poly Seal: Enhancing security of seal & proper operation
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
Proprietary “Ohm” cap to ensure utmost authenticity!
QSP process that achieves greater end-product purity: Cycle Life 73% @ 500 cycles of nominal average capacity
21700 HohmRunXL
QSP Li-NMC | 30.3A-38.6A | 4007mAh | 3.6V
Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**
Development started in 2017 with intent to only power Electric Vehicles. It’s just too good to keep it restricted to only EV projects
Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure. 100% blend new to Hohm Tech International
4k capacity, >30A load, in a structure under 72g weight!
Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology
NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity
QSP unlocks consistent and reliable 1.5C charging rates
World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification
