The Smoant Battlestar Squonker 200W Starter Kit is an innovative vape kit, featuring an integrated 7.0mL silicone squonk bottle, a slew of safety protections, and is paired with a squonk RDA to allow the best synergy between box mod and atomizer. Constructed from durable zinc-alloy, the Smoant Battlestar Squonker can withstand light drops and falls, protecting the proprietary chipset within. Also housed within the chassis is an 7.0mL silicone squonk bottle that slides into the box mod to be attached by a short measure of flexible tubing within, eliminating the need for an external bottle of juice to allow those that like to drip the ability to, without needing a bottle or removing the top cap or drip tip to do so. In addition, affixed to the exterior is an intuitive firing button and a pair of adjustment buttons. Prominently sitting at the top of the box mod is an ornate gold-plated squonking button to pump the internal resevoir of juice while possessing an anti-oversquonking feature to provide just the right amount of eJuice to saturate the cotton. Powered by a pair of high-amp 18650 batteries (sold separately) accessible via the bottom hinged battery door, the Battlestar Squonker has a range of 1 to 200 watts and can reach resistances as low as 0.05ohms while relaying the information on the 0.96″ OLED Display Screen. The Smoant Battlestar Squonker Box Mod is paired with the Battlestar Squonker RDA, a 24mm dual coil rebuildable atomizer that features a dual coil configuration anchored to four open terminals arranged on two posts, both top secured via flathead screws. A dual slotted top cap is held in place by a pair of silicone o-rings, venting the airflow from the side directly to the internal coil configurations. 

Smoant Battlestar Squonker Box Mod Features:

  • Dimensions – 87.5mm by 44.5mm by 40.5mm
  • Dual High-Amp 18650 Batteries – Not Included
  • Wattage Output Range: 1-200W
  • Voltage Output Range: 6.0-8.4V
  • Resistance Range: 0.05-3.0ohm
  • Temperature Range: 100° – 300°C / 200° – 600°F
  • VW Mode
  • TC Mode
  • 0.96″ OLED Display Screen
  • Intuitive Firing Button
  • Two Adjustment Buttons
  • Integrated 7.0mL Squonk Bottle
  • Bottom Filled Squonk Bottle – Hinged Rotating Door
  • Hinged Bottom Battery Door
  • Top Mounted Squonk Button
  • Reverse Protection
  • Over-Current Protection
  • Over-Heating Protection
  • Over-time Protection
  • Low Voltage Protection
  • Over Charge Protection
  • MicroUSB Port
  • 510 Connection
  • Available in Black, Yellow, Gunmetal, and Gradient Blue

Smoant Battlestar Squonker 24mm RDA Features:

  • 24mm Diameter
  • Deep Juice Wells
  • Brass and Stainless Steel Chassis Construction
  • Expansive Dual Post Build Deck – 4 Open Terminals
  • Top Secured via Flathead Screws
  • Positive Pin PEEK Insulation
  • Single or Dual Coil Configuration
  • Detachable Structure
  • Dual Slotted Angled Side Airflow System
  • Vents Directly To Coil Structure
  • BF Squonk Pin
  • 810 Resin Drip Tip
  • Available in Black, Yellow, Gunmetal, and Gradient Blue

Includes:

  • 1 Smoant Battlestar Squonker Box Mod
  • 1 Smoant Battllestar Squonker RDA
  • 1 Spare E-Liquid Bottle
  • 1 Solid Pin
  • 1 MicroUSB Cable
  • 1 Warranty Card
  • 1 User Manuals
  • 2 Spare Parts Pack